Victory Hammer S Manuel du propriétaire télécharger pdf (Page 45)

Pre-Ride Inspections

Front Suspension

Inspect the front forks for oil leaks or damage, and verify smooth suspension operation. See

page 59.

Steering

On level ground, straddle the motorcycle and bring it to the fully upright position. Turn the

handlebars from stop to stop. The action should be smooth but not loose. Make sure wires,

hoses and control cables do not interfere with smooth steering.

Rear Suspension

Proper rear suspension adjustment is essential for a safe and comfortable ride. Check rear

shock absorber movement and preload to ensure the correct amount of suspension travel and

ground clearance. See page 57.

WARNING! Inadequate ground clearance could result in components contacting the ground, causing

loss of control resulting in serious injury or death. Always ensure ground clearance is at specification.

Drive Belt

1. Check drive belt tension. See page 52. The drive belt should fit tightly.

Tip: The drive belt system must be cool, clean and dry to accurately measure belt tension (deflection).

Do not measure belt tension when the belt or drive system is wet, or when it is hot (such as imme-

diately after riding).

2. Inspect drive belt condition. If you discover cracks, broken teeth or frayed edges, replace

the drive belt before riding. See the VICTORY Service Manual or your authorized

VICTORY dealer.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 109 110

Pas de commentaire

Victory Hammer S Manuel du propriétaire Page 45