Victory Hammer S Manuel du propriétaire télécharger pdf (Page 91)

Storage

Removal From Storage

1. Remove the cover and any intake or exhaust coverings.

2. Unlock the front forks (if locked).

3. Verify that tire pressure is at specification.

4. Install the battery and perform an electrical inspection.

5. Check the oil level. If the motorcycle was stored in an area subject to wide swings in

temperature and humidity (such as outdoors), change the engine oil before starting the

engine. See page 51, beginning with step 3.

NOTICE: During storage, temperature and humidity changes can cause condensation to form in the

crankcase and mix with engine oil. Running the engine with oil that contains condensation

can cause engine damage.

6. Inspect the storage area for signs of fluid leaks. Identify and perform service to any

leaking components.

7. Install new spark plugs if necessary.

8. Wash and polish the motorcycle. Wax, polish, or apply protectant to appropriate

components.

9. Perform the pre-ride inspections. See page 32.

10. Perform a road test. See page 49.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 109 110

Pas de commentaire

Victory Hammer S Manuel du propriétaire Page 91