53
Maintenance
Drive Belt Tension Inspection Maintenance
Drive Belt Deflection - with 10 lbs. (4.5 kg) of force
HAMMER 8-BALL
VEGAS 8-BALL
VEGAS JACKPOT
HIGH-BALL
JUDGE
BOARDWALK
HAMMER S
New drive systems (new belt/sprockets) 5 mm +/- 0.5 mm 10 mm +/- 0.5 mm
After 500 miles on drive system 6 mm +/- 0.5 mm 12 mm +/- 0.5 mm
The following data is provided for use with a Sonic Tension Meter.
Follow the instructions provided with the meter.
Required Data Tension
Span 658.3 mm HAMMER S 32.3 Hz +/- 1
Belt width 28 mm HAMMER 8-BALL 48.3 Hz +/- 1
Belt mass constant 9.1 VEGAS 8-BALL / JACKPOT / HIGH-BALL /
BOARDWALK / JUDGE
48.3 Hz +/- 1
Drive Belt Wear Analysis
Internal tooth cracks
(hairline): OK to run, but
monitor condition
External tooth cracks:
Replace belt
Missing teeth:
Replace belt
Chipping (not serious):
OK to run, but monitor
condition
Fuzzy edge cord:
OK to run, but monitor
condition
Hook wear:
Replace belt
Stone damage:
Replace belt if damage is
on edge
Bevel wear (outboard edge
only): OK to run, but
monitor condition
Commentaires sur ces manuels