Victory Hammer S Manuel du propriétaire télécharger pdf (Page 72)

Maintenance

Wheel Spokes

Inspect both wheels for loose, bent, broken or missing spokes (if

equipped). To identify loose spokes, grasp each spoke and try to

move it side to side or up and down. All spokes should be

equally tight and have the same amount of flex. Tighten loose

spokes and replace bent, broken or missing spokes (see an autho-

rized VICTORY dealer).

WARNING! Spokes adjusted or replaced improperly could distort the

wheel, make the motorcycle difficult to handle, and cause loss of

control.

Wheels

Inspect both wheels for cracks or damage and replace damaged wheels promptly. Do not

operate the motorcycle if wheels are damaged or cracked. See the VICTORY Service Manual

or your authorized VICTORY dealer.

Exhaust System

Check the exhaust system for stains from leaking exhaust gasses. Replace damaged or leak-

ing exhaust gaskets. See the VICTORY Service Manual or your authorized VICTORY dealer.

Check all exhaust system fasteners.

1. Tighten exhaust header flange nuts.

Torque: 12 ft-lbs (16 Nm)

2. Tighten muffler mounting screws.

Torque: 18 ft-lbs (24.5 Nm)

3. Tighten the support bracket nut.

Torque: 35 ft-lbs (47.5 Nm)

4. Tighten muffler clamps.

Torque: 31 ft-lbs (42 Nm)

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 109 110

Pas de commentaire

Victory Hammer S Manuel du propriétaire Page 72