Victory Hammer S Manuel du propriétaire Page 71

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 110
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 70
67
Maintenance
Tires
Operating the motorcycle with improper tires or with improper or uneven tire pressure could cause loss
of control or accident. Always use the correct size and type of tires specified for your vehicle. Always
maintain proper tire pressure as recommended in the owner's manual and on safety labels.
Tire Pressure
Riding warms the tires and increases tire air pressure. For an accurate reading, check tire
pressure before riding. Adjust tire pressure as recommended for the total weight of your
intended load (see table).
WARNING! Do not exceed the maximum recommended inflation pressure to seat the bead. Tire or rim
failure may result.
Tire Condition
Inspect tire sidewalls, contact surface and tread base for cuts, punctures and cracking.
Replace damaged tires immediately. See the VICTORY Service Manual or your dealer.
Tire Tread Depth
The raised areas at the base of the tread are wear bars. When the road
contact surface has worn to the top of the wear bars, replace the tire.
For more precise measurement, and for tires not equipped with wear
bars, use a depth gauge or an accurate ruler to measure the depth of
the center tire tread. Replace the tire if the tread depth is less than 1/16
inch (1.6 mm).
Location Size Brand Type
Recommended Pressure
Loads up to
200 lbs (91 kg)
Loads up to
maximum load
capacity
HAMMER S / HAMMER 8-BALL
Front 130/70R18 63H Dunlop Elite 3 36 psi (248 kPa) 38 psi (262 kPa)
Rear 250/40R18 81V Dunlop Elite 3 38 psi (262 kPa) 41 psi (283 kPa)
VEGAS JACKPOT
Front 90/90 2154H Dunlop Elite 3 36 psi (248 kPa) 38 psi (262 kPa)
Rear 250/40R18 81V Dunlop Elite 3 38 psi (262 kPa) 41 psi (283 kPa)
NESS JACKPOT
Front 90/90 21 54H Dunlop Elite 3 36 psi (248 kPa) 38 psi (262 kPa)
Rear 250/40R18 81V Dunlop Elite 3 38 psi (262 kPa) 41 psi (283 kPa)
VEGAS 8-BALL
Front 90/90 2154H Dunlop Elite 3 36 psi (248 kPa) 38 psi (262 kPa)
Rear 180/55 B18 74H Dunlop D417 36 psi (248 kPa) 41 psi (283 kPa)
HIGH-BALL
Front 130/90 16 TL 67H Metzeler ME880 38 psi (262 kPa) 40 psi (276 kPa)
Rear 150/80 B16 TL 71H Metzeler ME880 40 psi (276 kPa) 42 psi (290 kPa)
BOARDWALK
Front 130/90 16 TL 67H Metzeler ME880 38 psi (262 kPa) 40 psi (276 kPa)
Rear 150/80 B16 TL 71H Metzeler ME880 40 psi (276 kPa) 42 psi (290 kPa)
JUDGE
Front 130/90 B16 67H Dunlop 491 Elite ll-RWL 36 psi (248 kPa) 36 psi (248 kPa)
Rear 140/90 B16 77H Dunlop 491 Elite ll-RWL 40 psi (276 kPa) 40 psi (276 kPa)
WARNING
Vue de la page 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 109 110

Commentaires sur ces manuels

Pas de commentaire